Products | About us | RFQ | Discount Pricing    CAGE CODE: 3ZLG1 Customer log in 
 
Order tracking 
Global Rope and Harness   View Cart | Comments
Products: Rope - Accessory & Prussic cord
• View all items in the Rope - Accessory & Prussic cord category •
⇐⇐ View the previous item in this category  •  View the next item in this category ⇒⇒

New England Ropes PRUSIK CORD 300ft x

Select a color or size optionQuantity: 
Price: $201.00 $182.91 on sale Buy the New England Ropes LM-440486 PRUSIK CORD 300ft x 440486
The New England Ropes LM-440486 PRUSIK CORD 300ft x 440486 for sale
  Weight:  8.4 lbs. (3.8 KG)
  Material:  100% dynamic Nylon
  Manufacturer:  New England Ropes
  Part # 440486 
  UPC: 000194404868
New England Ropes LM-440486 PRUSIK CORD 300ft x 440486 product details:  Cord specifically crafted for use as prusik cords
New England Prusik cord is dynamic
Special sheath construction is designed to provide superior holding prusik knots
2900lbs 8mm Tensile strength
3670lbs 9mm tensile strength
 
12 kN rated strength for the New England Ropes LM-440486 PRUSIK CORD 300ft x 440486 Rated strength: 12 kN (≈ 2698 lbs.)
 
Email the PRUSIK CORD 300ft x: Rope - Accessory & Prussic cord  Email the PRUSIK CORD 300ft x item details
There is a difference between this prusik cord and other accessory cord

New England Prusik cord is dynamic and the special sheath construction is designed to provide superior holding prusik knots. The Kernmantle construction has excellent grip.

The new dynamic prusik cord is designed specifically for use as a prusik. Its sheath construction, firmness, and feel provide superior hold in this application.

Sunlight/UV:
Very little degradation from sunlight. Can be used outside over long term if inspected regularly.

Chemicals:
Nylon will degrade with strong oxidizing agents, mineral acids, and 90% formic acid. May discolor when exposed to high levels of carbon dioxide.

Heat:
Nylon melts at 460°F with progressive strength loss above 300°F.

Dielectrics:
Good resistance to the passage of electrical current. However, dirt, surface contaminants, water entrapment, and the like can significantly affect dielectric properties. Extreme caution should be exercised any time a rope is in the proximity of live circuits.

Working Loads:
No blanket safe working load (SWL) recommendations can be made for any line because SWL's must be calculated based on application, conditions of use, and potential danger to personnel among other considerations. It is recommended that the end user establish working loads and safety factors based on best practices established by the end user's industry; by professional judgment and personal experience; and after thorough assessment of all risks. The SWL is a guideline for the use of a rope in good condition for non-critical applications and should be reduced where life, limb, or valuable property is involved, or in cases of exceptional service such as shock loading, sustained loading, severe vibration, etc. The Cordage Institute specifies that the SWL of a rope shall be determined by dividing the Minimum Tensile Strength of the rope by a safety factor. The safety factor ranges from 5 to 12 for non-critical uses and is typically set at 15 for life lines.

Splicing Instructions:
Not Spliceable
   View similar items
Patroller Supply | Denver, Colorado 80216 | (303) 507-0222
sales@PatrollerSupply.com | www.PatrollerSupply.com | Copyright © 2017 Patroller Supply
Product list    |    Category list    |    Department list    |    Manufacturer list    |    Products    |    About us    |    View Cart

View in Mobile format